Why does the fuse always burn when the X-ray machine is exposed?

X-ray machine will encounter many problems in the process of use. Today, let’s take a look at what happens when the X-ray machine always burns the fuse when it is exposed. As far as I know, this may happen for the following reasons:
(1) It may be the reason that the machine is very old. Check whether the power supply voltage is unstable and whether the conditions are too large when filming. It is possible to change a larger fuse appropriately. It is estimated that the bulb is dying. Another possibility is that the insulation performance of the high-voltage cable has deteriorated. You can try exchanging the cathode cable and the anode cable.
(2) The problem of high pressure. Where the high voltage has a breakdown and short circuit, and the KV number used by the perspective is relatively low, it is not easy to ignite. Or due to the aging of the expansion and contraction device, there is a little oil leakage due to the temperature level. When the perspective is used, the bubbles are placed on it. .
(3) The internal resistance of the power supply is too large, because the electric power of the perspective is relatively small, the power of the film is relatively large, and the current is also large and it is easy to burn the insurance. You can open it to see the fuse that burns: if the black fuse is gone, it is usually a high-voltage short circuit. If there is a small ball at the two ends, the current should be too large instead of a short circuit.
(4) For very old machines, the high-voltage generator and filament transformer are all installed together, so there should be no high-voltage cables. Due to the long-term high pressure of the integrated bulb, the transformer oil is easy to carbonize and the insulation will be reduced. There will be a breakdown between the primary and secondary stages of the transformer, and there will be a small amount of gas in the X-ray tube, which will cause a short circuit when exposed to light, etc., which will burn the insurance.
The X-ray machine always burns the fuse when it is exposed, which may be caused by the above reasons. Check it out if you have a similar problem.
We Shandong Huarui Imaging Equipment Co., Ltd. is a manufacturer of X-ray machines. If you have any questions about this product, you can contact us at +8617616362243!