An X-ray machine is a device used to generate X-rays. It can be divided into industrial X-ray machines and medical X-ray machines. Industrial X-ray machines can be divided into hard-ray machines and soft-ray machines according to the intensity of the rays produced. The radiation analyzers used for physical and chemical testing belong to soft rays, while those used for the detection of large and thick materials are hard rays. High-voltage electricity can be used to generate stress-rays, such as 100Kv or 300Kv voltage is applied to the x-ray tube, and the generated rays can penetrate 5–50mm steel plates. And the method of electron accelerator can produce the radiation that penetrates the steel plate above 100mm. Machines that use high-voltage electricity can be divided into portable and mobile (fixed)
Before operation, you should first check whether the various instruments, regulators, switches, etc. on the control panel are in the normal position (zero position or lowest position). Turn on the main power switch and the power button of the machine, adjust the power supply voltage to the rated voltage (220V or 380V), and give enough warm-up time at the same time. During exposure, the knob cannot be temporarily adjusted. Because each regulator affects the occurrence of high voltage during the irradiation process of the X-ray machine, a large current flows through the high-voltage primary contact point. At this time, the adjustment knob may cause a large arc at the contact point, resulting in instantaneous high voltage and damaging the X-ray machine. The main parts of the thread machine.
According to the needs of photography or fluoroscopy, select the stage exchange, technology selection switch and exposure conditions, etc.
We Weifang Newheek Electronic Technology Co., Ltd. is a manufacturer specializing in the production of X-ray machines and their accessories. If you have any questions about this product, you can contact us. The consultation phone number (whatsapp): +8617616362243!
Post time: Jan-05-2023